Blog - In-saiL

Home
Blog

Suggestions on the application design of plastic nuts

2023-12-21 16:09

In many plastic parts, in order to install, connect, etc., it is often necessary to place some metal parts or other material parts in plastic parts, these parts are collectively referred to as the ins...
The threaded inserts are used in plastics and selection

2024-10-29 09:33

Several types of copper nuts and injection molding methods and the classification of nuts is the embedding method determines what kind of nut the user chooses, rather than the type of implanted nut de...
Thickness requirements for threaded fastener surface coating

2024-10-29 09:41

Electroplated layer According to the requirements of the ISO 4042-2018 Fasteners-Electroplated coating systems standard, the nominal coating thickness of the electroplated coating is 3μm-30μm. ...
Basic knowledge of fasteners

2023-12-21 16:29

There are two main units of length measurement in the world today, one is the metric system, the unit of measurement is meter (m), centimeter (cm), millimeter (mm), etc.,
Tolerance and fit of thread

2024-10-29 10:08

The tolerance zone of the thread is determined by the position of the tolerance zone and the size of the tolerance zone.

1 2 3